Polyester Construction Harness

Vest style design, Polyester webbing fall arrest harness for working at height.

*          Frontal fall arrest attachment point and rear dorsal dee.

*          Easy to don with fully adjustable chest, shoulder and leg straps.

*          Label pack stores all relevant harness documents.

*          Lanyard ring on label pack for temporary lanyard parking.

*          Brightly coloured webbing to increase worker visibility.

Part Number:

M1020063       - Fall Arrest Harness

  Webbing lanyards

 *          35mm polyester webbing with integral compact energy absorber.

*          19mm double acting hooks each end.

*          Single or double leg lanyards available

            Part Numbers:

           *L11WEC2.0 - 2m 19mm Hooks     *L11WEC1.5 - 1.5m 19mm Hooks
           *L11WEC1.2 - 1.2m 19mm Hooks  *LD11WEC2.0 - 2m TWIN 19mm Hooks

Contractor Value Plus Harness

Vest style design, polyester webbing fall arrest harness with integrated lanyard for working at height.

*          Frontal fall arrest attachment point and rear dorsal dee.

*          Integrated 2 meter shock absorbing lanyard.

*          Easy to don with fully adjustable chest, shoulder and leg straps.

*          Label pack with lanyard parking ring stores harness documents.

         *          Suited to work in Elevated Work Platforms (EWP), construction  and general maintenance.

                    Part Number:

                    M1020064       - Harness with Integrated Lanyard

Contractor Roof Worker Kit

The Contractor roof worker kit contains all the equipment needed for roof work, packed into a carry bag.

>        The kit contains the M1020002 two point fall arrest harness, 15m anchorage line with type 1 fall arrest device, and a webbing tie-off adaptor all packed into a convenient carry bag.

*          Suited to roof working applications.

*          Easy to carry from site to site.

Part Number:

Miller TurboLiteTM

TurboLite is a small and light fully compliant retractable Fall Arrest Block designed to be used as a personal fall limiter arresting free fall within millimetres.
Workers will no longer need to “switch-out” equipment to maintain a safe fall distance. Because TurboLite™ eliminates the need for different fall protection equipment when fall clearance changes, workers are always able to use the proper

equipment at varying height levels.

Miller TurboLite™ PFLs can also be used in horizontal and foot level applications where an overhead

anchorage point is unavailable.

• Its retractable technology prevents trip hazards while its built in swivel also prevents lifeline twisting.
 

• The TurboLite is extremely compact and light weight.
 

• It provides 2m working capacity lifeline which attaches directly to the harness back D-ring for greater mobility and versatility.
 

• The high strength, impact resistant nylon housing and engineered HiTech Polyester/ Vectran Webbing provide

more resistance to abrasion, increasing durability.
 

• The TurboLite eliminates the need for different fall protection equipment to address fall clearance and reduces

risk as workers will always be

using the proper equipment when fall clearance changes
 

• The TurboLite can also be used in horizontal and foot level applications where an overhead anchorage point is unavailable.
 

• Conforms to standard EN 360, accepted under clause 1.6 of AS/NZS 1891.3

Applications: Miller TurboLite™ PFLs provide increased mobility and freedom of movement and are ideal for use in construction, utilities and warehousing.

Part No:

1017900 - TurboLite 2m Twistlock karabiner/Aluminium snap hook
MFL1/2M-AUS - TurboLite 2m Twistlock Karabiner/19mm snap hook
MFL2/2M-AUS - TurboLite 2m Twistlock Karabiner/ Scaffold hook
MFL3/2M-AUS - TurboLite 2m No top attachment/19mm hook
MFL12/2M-AUS - TurboLite 2m Twistlock Karabiner/ Scaffold hook
MFL13/2M-AUS - TurboLite 2m TAK e/end
MFLB - Twin TurboLite Connector Bracket
 

501 Screwgate Karabiner

*          Karabiner with 16mm opening.

*          Alloy steel.

*          Screwgate.

*          22kN strength.

Part No:

501      - Screwgate Karabiner - Each
501-10 - As above - Pack of 10

Webbing tie-off adaptor

* Wraps around an anchorage point providing a suitable connection.
* Allows attachment to anchorage point.
* Available in 1 or 2m lengths.
* Single person anchorage point.

Part No:
WT01M - 1m Webbing tie-off adaptor
WT02M - 2m Webbing tie-off adaptor